| OSBORN LOAD RUNNERS PLR-10 Cam Follower and Track Roller - Stud Type | Basic dynamic load rating (C):23,5 kN; Bc:18 mm; Ew:35 mm; Bearing number:K 28x35x18; Fw:28 mm; Bore Diameter (mm):28; Basic static load rating (C0):33,5 kN; Weight:0,031 Kg; Brand:NBS; Outer Diameter (mm):35; |
| INA KR90-X-PP Cam Follower and Track Roller - Stud Type | Basic static load rating (C0):189 kN; d2:55 mm; Outer Diameter (mm):105; D:105 mm; d3:105 mm; r1 min.:1 mm; A1:36,5 mm; Bearing number:54214; r min.:1 mm; T2:30,3 mm; |
| INA KR72-X-PP Cam Follower and Track Roller - Stud Type | Bore Diameter (mm):57; Basic dynamic load rating (C):61,8 kN; Basic static load rating (C0):134 kN; T:45 mm; Bearing number:52211; Size (mm):57x90x45; Brand:CX; D:90 mm; d1:45 mm; Weight:1,1 Kg; |
| INA KRE19 Cam Follower and Track Roller - Stud Type | SI:90; Bearing number:NA5916; ra max.:1 mm; hidYobi:NA5916; d2:80; C1_:40; D_:110; da_max:105; SDM_:96.5; Brand:NSK; |
| OSBORN LOAD RUNNERS PLR-2-1/2-16 Cam Follower and Track Roller - Stud Type | Characteristic cage frequency, FTF:0.44 Hz; Bore Diameter (mm):45,242; d:45,242 mm; Max operating temperature, Tmax:120 °C; T:19,842 mm; Outer Diameter (mm):80; Nlim (grease):4,600 rpm; Characteristic rolling element frequency, BSF:7.72 Hz; Dynamic load, C:57.5 kN; Mass:0.4 kg; |
| INA KRVE32-PP Cam Follower and Track Roller - Stud Type | Basic dynamic load rating (C):76,5 kN; DI_:54.477; Prod_Type3:TRBSR_ID_A; Calculation factor (e):0,33; KBRG:3161; inner r:1.5; (Grease) Lubrication Speed:4500 r/min; BET21:3; Db:77 mm; C_:19.05; |
| OSBORN LOAD RUNNERS PLRE-2 Cam Follower and Track Roller - Stud Type | d:75 mm; Outer Diameter (mm):160; Size (mm):75x160x37; Bore Diameter (mm):75; Bearing number:6315-2RS; D:160 mm; Brand:Fersa; B:37 mm; Width (mm):37; |
| OSBORN LOAD RUNNERS PLR-1-3/4-5 Cam Follower and Track Roller - Stud Type | Bore Diameter (mm):70; Outer Diameter (mm):75; Material:Copper plated steel; Average Clearance (Cd):0.1780; Shaft Size (ds) - 70 +0 / -0.046:70 +0 / 0.046; ID Chamfer Angle (B deg.):45; OD Chamfer Length (Co):1.800; Bearing Length, Nominal (B):40.000; Lube Hole Dia. (dl):8.000; Brand:AST; |
| INA KRV62-PP-X Cam Follower and Track Roller - Stud Type | d:70 mm; Fillet Radius/Chamfer:1.5 mm; Center Guidance:Floating Steel Ring; Nr. of Holes:4; D:125 mm; Axial Load Factor Y2:4.27; Bore Type:Tapered Bore; da (min):78.5 mm; Retainer Material:Pressed Steel; Limiting Speed - Oil:5,600 rpm; |
| OSBORN LOAD RUNNERS PLR-4-1/2 Cam Follower and Track Roller - Stud Type | G1 - Heat Generation Factor (Roller-Raceway):77.2; C1 - Dynamic Radial Rating (1 million revolutions)6:32200 lbf; a - Effective Center Location4:-0.16 in; db - Cone Backface Backing Diameter:3.07 in; Design Units:Imperial; R - Cone Backface To Clear Radius3:0.09 in; K - Factor8:1.52; Series:475; G2 - Heat Generation Factor (Rib-Roller End):23; B - Cone Width:1.1420 in; |
| OSBORN LOAD RUNNERS PLR-2 Cam Follower and Track Roller - Stud Type | Dimension J (Bolt Size):0.75 in; Engineering Group:Mounted Bearing; Oil Lubrication - M/N Seal:1200 rpm; Oil Lubrication - T Seal:2000 rpm; Weight:40.0 lb; e - Geometry Factor:0.26; Bearing Number:22220; C - Dynamic Load (Basic):97700 lb; Dimension D:9.060 in; Grease Lubrication - T Seal:1600 rpm; |
| OSBORN LOAD RUNNERS PCR-5/8 Cam Follower and Track Roller - Stud Type | Compatibility:FORD / ESCORT III I; Designation SX:CX023; Designation Ruville:5216; Bearing number:R152.16; Brand:SNR; Designation SKF:VKBA 686; |